Serving the League City area  ·  (832) 957-9153  ·  Open Mon-Sun 7am-7pm
📞 (832) 957-9153 Free Quote

Metal Roofing in Alvin, TX (77511) · Local Professionals

League City Metal Roofing · Fast response in Alvin and the League City area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+142Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Alvin is farm country with a hurricane problem. The prairie edge here is flat, windy, and wide open, and the mix of pier-and-beam farmhouses, metal-roofed barns, and 1970s brick ranches around the Brazoria County Fairgrounds takes everything a Gulf storm can throw at it. Lots are big, drainage is slow on that heavy clay, and a roof that isn't fastened right will let you know it.

We're League City Metal Roofing, and Alvin is a regular stop for our crew. We know the drive down Highway 6, the older homes near the old downtown, and the newer subdivisions off FM 1462. When a storm peels back a panel or a screw backs out on a barn roof, we're the call that gets answered. We're fully insured, and we give free estimates at (832) 957-9153.

Metal Roofing in Alvin (77511)

Alvin sits on flat coastal prairie, and that means wind has nothing to slow it down. On the farm-edge properties and the larger lots toward Santa Fe, we see a lot of pier-and-beam homes and outbuildings where the roof is the first thing to fail. The heavy clay soil holds water after a big rain, so we pay attention to where runoff goes, especially on low-slope porches and additions. Access is usually easy on these lots, but tight tree lines and fence rows can make panel delivery interesting. We plan the staging before we show up so we're not dragging 20-foot panels through a garden.

Our team has worked on everything from corrugated barn roofs to standing seam on newer brick homes off FM 1462. We know how salt air from the coast corrodes bare fasteners, and we use the right screws and washers for the job. We also handle retrofit over existing shingles when the deck is sound, which is common on the older ranches here. If you're in 77511 and you want a roof that can take the next blow, we've done it before.

Our services in Alvin

How a Job Works in Alvin

Step 1: You call us at (832) 957-9153 or send a message. We set up a free on-site assessment, usually within a day or two. We walk the roof, check the fasteners, seams, and flashing, and look at the deck where we can. You get a written estimate with options, not a high-pressure pitch.

Step 2: Once you approve, we pull the permit with the city or county as required and schedule the work. On Alvin jobs, we often coordinate with the homeowner on panel delivery and staging so we don't block a driveway or a field gate. If it's a retrofit over shingles, we confirm the existing layers are within code before we start. We keep the site tidy and protect landscaping as best we can.

Step 3: When the job is done, we clean up. That means magnets for nails, a sweep of the yard, and a final walkthrough with you. We don't leave until you've seen the work and we've answered your questions. We leave your property clean, and we stand behind what we install.

Pricing in Alvin depends on the roof, the access, and the condition of what's underneath. For a basic corrugated or ribbed panel roof, we start around $5.50 per square foot. Metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you're going over existing shingles, retrofit starts at $7 per square foot, but that only works if the deck and layers meet code. Repairs and leak fixes start at $450, and screw replacement and re-fastening starts at $750. Stone-coated steel and metal shingles start at $9 per square foot, and copper or specialty metal starts at $20. We give free estimates, so call (832) 957-9153 and we'll give you a real number for your roof, not a guess.

My barn off FM 1462 has corrugated panels that are backing out screws. Can you re-fasten without replacing the whole roof?
Yes, that's a common job for us on Alvin outbuildings. If the panels are still sound and the purlins are solid, we can replace the screws with the right coated fasteners and washers and re-seat the panels. We'll check for any cracked or enlarged holes and use larger screws or sealant as needed. If the panels are too far gone, we'll tell you straight and give you a replacement estimate.
A storm just took off some panels on my house near the fairgrounds. How fast can you get out?
We prioritize storm damage calls in Alvin and the surrounding area. Call us at (832) 957-9153 and we'll schedule a free inspection as soon as we can, often the same day or next. We can tarp or secure the roof to prevent more water damage, then give you a repair or replacement estimate. We document everything for your insurance claim, but coverage is up to your policy.
What does a typical metal roof replacement cost for a 1,500 square foot ranch house in Alvin?
For a basic corrugated or ribbed panel roof, you're looking at roughly $5.50 to $8 per square foot installed, so a 1,500 square foot roof might run $8,000 to $12,000 depending on pitch, access, and whether we're removing the old shingles. Standing seam runs more, starting at $10 per square foot. We give free estimates, so call (832) 957-9153 and we'll measure and give you an exact price.
Do I need a permit to replace my roof in Alvin, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Alvin, and the rules vary by jurisdiction. We pull the permit for you and coordinate the inspection. We always defer to the local building department for the final word on what's required for your address.
My neighbor's tree limbs hang over my roof, and I'm worried about liability if a limb falls. What can I do?
That's a property line and neighbor issue, and it's best handled directly with your neighbor. In Texas, you generally have the right to trim branches that cross onto your property, but not to damage the tree. If you're in an HOA, check the rules first. We can inspect your roof for damage from overhanging limbs and give you a repair estimate, but we don't get involved in neighbor disputes.
Are you insured for work on my property in Alvin?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you if anything goes wrong on the job.
What should I do to maintain my metal roof in Alvin between storms?
Keep the roof clear of leaves and debris, especially in valleys and behind chimneys. Check the fasteners once a year for backed-out screws or worn washers, and look at the sealant around flashing and penetrations. After a big storm, walk the yard and look for popped panels or granules. If you see anything off, call us for a free inspection at (832) 957-9153. Catching a small issue early saves you a leak repair.
Why choose us?

Trusted professionals in League City

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in League City

All your work handled by qualified professionals in League City

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

142+ Verified Client Reviews in League City

⭐⭐⭐⭐⭐ 4.9/5 · 142 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in League City · Response within 24h · No commitment · ☎ (832) 957-9153

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in League City ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm