Serving the League City area  ·  (832) 957-9153  ·  Open Mon-Sun 7am-7pm
📞 (832) 957-9153 Free Quote

Metal Roofing in Galveston, TX (77554) · Local Professionals

League City Metal Roofing · Fast response in Galveston and the League City area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+142Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Galveston's historic island homes face salt air and hurricane wind every season, and the roofing here has to be tougher than the mainland. From the Victorian cottages near the Strand to the raised beach houses out on the West End, we see the same pattern: bare steel fasteners corrode fast, seams separate in a blow, and one missing shingle turns into a ceiling stain by the next thunderstorm.

Homeowners in Galveston (77554) call League City Metal Roofing because we work this island regularly and know what the Gulf does to a roof. Whether you are near Stewart Beach or off 61st Street, we can get out there, take a look, and give you a straight answer.

Metal Roofing in Galveston (77554)

Galveston is flat, low, and close to the water, and that shapes every roofing job. On the East End, you have early-1900s frame cottages and bungalows packed onto narrow lots near the Main Street district, where access is tight and historic design review can restrict panel profiles and colors. Out toward the West End and 77554, the housing stock shifts to stilted beach homes and canal-front properties, where wind uplift and salt spray are the main enemies. The soil is heavy clay, drainage is slow after a big rain, and the salt air eats through cheap fasteners and thin gauges. We see a lot of wind-lifted panels, failed fasteners, and flashing gaps around chimneys and skylights. Standing seam and copper or specialty metal roofs hold up best against the salt and wind, and we install both.

Our team serves Galveston and the surrounding League City area, so we are not making a special trip from far away. We know the difference between a roof on a pier-and-beam cottage and one on a newer stucco home, and we price and plan accordingly.

Our services in Galveston

How a Job Works in Galveston

Step 1: You call us at (832) 957-9153 or request a free estimate online. We schedule a time to come out, inspect the roof, and talk through what you are seeing. On the island, that often means checking fasteners, seams, and flashing first, since those are the usual suspects. We give you a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required permits through the local building department and coordinate any historic district or HOA review if your property falls under one. On tight East End lots, we plan material staging carefully so we do not block neighbors or damage landscaping. Then we do the work: tear-off or retrofit, install new metal, and handle flashing and trim. We keep the site secure each day, especially during storm season.

Step 3: When the job is done, we clean up thoroughly, haul away old material, and walk the roof and yard with you. We make sure you know what was done, what to watch for, and how to reach us if anything comes up. We leave your property clean and your roof ready for the next Gulf storm.

Pricing in Galveston depends on the size and pitch of your roof, how easy it is to access, the condition of the existing decking, and how soon you need it done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over shingles around $7. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and flashing or chimney repair around $600. Stone-coated steel and metal shingle roofs start around $9 per square foot, and copper or specialty metal around $20. We give free estimates, so call (832) 957-9153 and we will get you a real number for your Galveston property.

My West End beach house has rust streaks around the fasteners. Is that a repair or a replacement?
That is common on the island because salt air corrodes bare steel fasteners fast. Often we can replace the fasteners with corrosion-resistant ones and treat the panels, but if the panels themselves are perforated or the seams are failing, replacement may be the better long-term fix. We will inspect and give you both options with pricing.
A storm just peeled back part of my roof near the Seawall. How fast can you get out?
We prioritize storm and wind damage calls in Galveston. Call (832) 957-9153 and we will schedule a free inspection as soon as possible, often same or next day depending on volume. We can tarp or secure the area to prevent further water damage while you wait for the permanent repair.
What does a typical metal roof cost for a 1,500 square foot home in 77554?
For a home that size, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam could run closer to $10 per square foot. The exact price depends on roof complexity, access, and whether we are removing the old roof. Call us for a free estimate tailored to your property.
Do I need a permit to replace my roof in Galveston, and does the historic district affect what I can install?
Yes, roofing permits are commonly required for a full replacement, and thresholds and fees vary. If your home is in a historic district, design review may restrict panel profile and color. We handle the permit process and can help you understand what is allowed before you choose a material.
My neighbor and I share a property line, and my new metal roof will overhang slightly. What should I do?
Property line issues are best resolved before work starts. We can adjust the design to keep overhangs within your line, and if your neighborhood has an HOA, we will coordinate the approval. Talk to your neighbor early, and we can provide drawings or specs if needed.
Are you fully insured for work in Galveston?
Yes, we are fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before we start any job on your property.
What maintenance does a metal roof need in Galveston's salt air?
Salt air is hard on fasteners and exposed metal. We recommend an annual inspection, especially after storm season, to check for loose fasteners, corrosion, and seam separation. A coating can also help extend the life of the panels. We offer inspections and maintenance plans.
Why choose us?

Trusted professionals in League City

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in League City

All your work handled by qualified professionals in League City

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

142+ Verified Client Reviews in League City

⭐⭐⭐⭐⭐ 4.9/5 · 142 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in League City · Response within 24h · No commitment · ☎ (832) 957-9153

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in League City ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm