Serving the League City area  ·  (832) 957-9153  ·  Open Mon-Sun 7am-7pm
📞 (832) 957-9153 Free Quote

Metal Roofing in Texas City, TX (77590) · Local Professionals

League City Metal Roofing · Fast response in Texas City and the League City area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+142Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Texas City is a working waterfront town where the salt air off Galveston Bay eats at bare steel fasteners and the summer storms come in fast off the Gulf. The housing stock tells the story: mid-century brick ranches near the refineries and along Palmer Highway, newer stucco and brick homes out toward the Lago Mar and west side, and a mix of cottages and pier-and-beam places closer to the bayfront. Metal roofs are common here for a reason, and we have been installing and repairing them for homeowners across 77590 for years.

Our team knows the difference between a roof that survives a Texas City squall and one that peels back at the first seam. We are based in League City, just up the road, and we spend a lot of time on roofs in Texas City, from the older neighborhoods near Mainland Park to the newer subdivisions off Highway 146. When you call (832) 957-9153, you get a local crew that has seen what the salt and wind do to a roof here.

Metal Roofing in Texas City (77590)

Texas City sits on flat coastal prairie, barely above sea level, with heavy clay soil that shifts with the wet and dry cycles. That matters for roofing because the ground around your foundation and the grade at the eaves affect drainage and how water moves away from the house. On the older homes near the bayfront and in the historic areas, we often find pier-and-beam construction and original metal roofs that have been patched over the years. The salt air here is tough on fasteners and exposed metal edges, so we pay close attention to screw replacement and re-fastening, especially on corrugated and ribbed panels. Newer homes out toward Lago Mar and the west side tend to have architectural shingles, and many homeowners are switching to standing seam or stone-coated steel to get better wind and salt resistance. The industrial corridor and the proximity to the refineries mean we also work on commercial and agricultural metal roofs, where access and safety planning are part of the job.

We have been serving Texas City and the surrounding League City area long enough to know the local building department, the HOA requirements in the newer subdivisions, and the quirks of the older housing stock. Whether it is a full metal roof replacement on a 1960s ranch or a leak repair on a waterfront home near the dike, our team has the experience to get it right.

Our services in Texas City

How a Job Works in Texas City

Step 1: It starts with a call to (832) 957-9153 or a request through our website. We schedule a free on-site assessment at your Texas City property, and we take the time to look at the roof, the attic, the flashing, and the drainage. We will check for active leaks, wind damage, and any signs of corrosion from the salt air. You get a written estimate with clear options, whether you need a repair, a replacement, or a retrofit over existing shingles.

Step 2: Once you approve the scope, we pull the required permits with the City of Texas City and coordinate any HOA design review if you are in a subdivision like Lago Mar or the Villages of Texas City. On the work days, our crew arrives on time, protects your landscaping, and keeps the site organized. Tight lot access is common in the older neighborhoods, so we plan material delivery and staging carefully. We also watch the weather, because afternoon thunderstorms can pop up fast, and we do not leave an open roof exposed.

Step 3: When the work is done, we clean up thoroughly, haul away all debris, and do a final walkthrough with you. We make sure you understand the warranty, the maintenance needs, and how to spot any issues down the road. We leave your property clean and your roof ready for the next storm season.

Pricing for metal roofing in Texas City depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over your existing shingles, that starts at $7 per square foot, but keep in mind that local code limits how many layers you can have. Repairs start at $450, and screw replacement and re-fastening start at $750. Gutters for metal roofs start at $9 per linear foot, which is a common add-on for Texas City homes dealing with heavy rain runoff. For a free estimate tailored to your property, call (832) 957-9153. We will give you a straight answer and no pressure.

My metal roof near the Texas City Dike has rusted screws and some loose panels. Can you fix that without replacing the whole roof?
Yes, that is a common issue on the bay side where salt air is hardest on fasteners. We start with a free inspection to check the panels, seams, and flashing. In many cases, we can replace the screws with corrosion-resistant fasteners, re-secure loose panels, and treat any surface rust. If the panels themselves are too far gone, we will tell you honestly and give you options for a partial or full replacement.
A storm just blew through Texas City and lifted some panels on my roof. How fast can you get out for an emergency repair?
We prioritize storm damage calls in Texas City and the surrounding area. Call us at (832) 957-9153 and we will schedule the soonest available inspection, often same or next day depending on volume. We can tarp or secure the roof to prevent further water damage, then provide a written estimate for the permanent repair. We also document the damage for your insurance claim if you need it.
What does a typical metal roof replacement cost for a 1,500 square foot ranch house in Texas City?
For a basic corrugated or ribbed panel roof, you might be looking at around $5.50 to $8 per square foot installed, so a 1,500 square foot roof could range from roughly $8,000 to $12,000 depending on pitch, access, and whether we need to remove the old roof. Standing seam and stone-coated steel run higher, starting at $9 to $10 per square foot. We give you a detailed estimate after inspecting the property, so you know exactly what you are paying for.
Do I need a permit from the City of Texas City to replace my roof, and can you handle that for me?
Yes, a roofing permit is typically required for a full replacement or re-roof in Texas City, and the requirements can vary based on the scope of work. We handle the permit application and inspections as part of the job. If your home is in a historic district or an HOA, there may be additional design review, and we can help coordinate that too. We always defer to the local building department for the final word on what is required.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
That is a good question, and it comes up in Texas City's older neighborhoods where lots are close together. We design the roof and gutter system to manage water on your property, but we also recommend checking your plat or survey to confirm property lines and drainage easements. If you are in an HOA, review the architectural guidelines before you choose a panel profile or color. We can work with you and your neighbor to avoid problems.
Are you insured for roofing work in Texas City, and what kind of coverage do you carry?
Yes, we are fully insured. We carry general liability insurance and workers' compensation coverage for our crew. That protects you and your property in case of an accident on the job.
What maintenance should I do on my metal roof in Texas City to make it last through hurricane season?
Given the salt air and strong winds here, we recommend an annual inspection, ideally in late spring before storm season peaks. Check for loose or missing screws, backed-out fasteners, and any signs of rust or corrosion, especially on older panels. Keep gutters clear of debris so water does not back up under the panels. After a major storm, do a visual check from the ground and call us if you see anything unusual. A little preventive maintenance goes a long way in this climate.
Why choose us?

Trusted professionals in League City

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in League City

All your work handled by qualified professionals in League City

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

142+ Verified Client Reviews in League City

⭐⭐⭐⭐⭐ 4.9/5 · 142 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in League City · Response within 24h · No commitment · ☎ (832) 957-9153

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in League City ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm